Eradicator is a no-rinse floor finish remover.
Rapid Emulsification of Old Finishes
Labor-saving, Fast Penetrating Formula
For Use Without Scrubbing Machines
 
Directions: Dilute 1 to 4 for no rinse stripping. Use hottest water available. Apply diluted solution directly to floor and allow to sit for 5-10 minutes. Remove solution with wet vacuum, or automatic scrubber. No rinsing required. Let floor dry, checking for powdery residue. Rinse if powdery residue remains on floor. STORAGE: Store in a cool place, away from ignition sources. This product is for use in industrial settings by trained personnel only.
 
Caution: Combustible mixture. Harmful if inhaled or absorbed through skin. Keep out of reach of children.EXPOSURE: This product can cause irritation and tissue damage to eyes and skin depending on exposure, including dermatitis, defatting, and irritation. Nausea, vomiting, and diarrhea may occur upon consumption.It is recommended to wear protective gloves and safety glasses when using this product. Use in area with adequate ventilation. Refer to M.S.D.S. for additional safety information. FIRST AID: If in eyes, flush with water for 15 minutes, lifting eyelids occasionally. If ingested, drink 2 cups of water then induce vomiting. Seek medical attention immediately.
HMIS RATINGS: Health…2 Flammability…2
Reactivity…0 Personal Protection…G
INGREDIENTS: Chemical Name/C.A.S. #
2-Butoxyethanol………111-76-22
Monoethanolamine…….141-35-5
Water………..…..……..7732-18-5