Fast Break is a USDA-Approved Alkaline Cleaner. 
Removes exhaust deposits, dirt, bug residues, and more from heavy equipment and painted vehicle surfaces
Works with hot or cold water
Saves valuable labor
 
Directions: Mix one part FAST BREAK with 25 parts water to remove heavy soil or traffic film with no brushing. For heavily soiled surfaces with electrostatically-charged emissions deposits, it may require a 1 to 10 solution. Apply in a pump-up sprayer or through a pressure washer.Apply proper dilution to surface to be cleaned, working from bottom to top to avoid streaking. Hold pressured nozzle 10-12 inches from surface. Note: For best results, apply hot (146 to 160 degrees Fahrenheit) and with 600psi or greater pressure.
 
Caution: Due to the strong alkalines contained in this product, avoid skin or eye contact. Wear protective clothing and gloves.
FIRST AID: If in contact with eyes, rinse thoroughly with water for about 15 minutes. Seek medical attention if irritation persists.
ATTENTION: This container can be hazardous when empty or re-used. May contain product residue. It is your duty to ensure that container reuse is suitable for the purpose intended, and in compliance with applicable regulations. DO NOT CUT, GRIND, WELD, OR DRILL NEAR THIS PRODUCT.
INGREDIENTS: Chemical Name/C.A.S. #: 
Ethylene Glycol Monobutyl Ether… 111762 
Sodium Hydroxide Solid…1310737
HMIS RATINGS: Flammability…2 Health…2 
Reactivity…2 Personal Protection…0